What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 27.06.2025 14:02

2024–10–16 [ OO OLAOYE OYEBODE ]
In schematic diagrams this is the symbol for a fuse:
The bolt then partially travels down the line to your home.
What to know about nerve pain and tingling hands and feet - The Washington Post
He then describes Rainy Season and Lightning.
the problem then depends on "how fast does the fuse operate?".
But… the neutral is now “floating” because of the 1 ohm resistance.
What are the gifts you got when you cleared JEE ?
Edit 2024–10.
but I think this circuit , shows a few more pieces.
This is 'the assistant's answer'
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
nine
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Why are your TikTok videos getting low views?
A fuse is a non-resetable over current circuit protector.
This is where the MOV conducts again, and dissipated the energy.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Why is my ex trying to provoke an argument with me?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
The third is lightning and “how it gets conducted into a home.”
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
What does a fuse do?
Bryce Huff thankful he landed with 49ers - NBC Sports
Because the load is inductive, the current lags the voltage.(by a bit).
a photo is worth a thousand words.
There are two important concepts here.
Do you think Trump is a bad a$$? Why or why not?
A circuit breaker is similar, but is resettable.
At one ohm, the resistor has a maximum of 1 watt power.
So, the voltage could go up to 500 volts, and the fuse will not open up.
Macklemore’s Seattle home reportedly robbed with his 3 children inside - New York Post
Here is a simplified AC power diagram.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Off-the-shelf stem cell therapy for type 1 diabetes continues to show positive results - STAT
This is the picture of an electronic coil of wire wound around a core of magnetic material.
[old diagram got deleted by accident]
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Can an astrologer predict that someone is in a physical relationship before marriage?
This is where this question deviates from being a 'generic' question, and becomes more specific.
For this case there are devices called Metal oxide varistors (MOV).
This device then solves the entire problem.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
These are simplified answers to the original question, and does not change anything I wrote above.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Sean Combs Trial: Possible Juror Dismissal and Mogul’s ‘Threatening’ Voice Notes - Rolling Stone
This one hit behind the barn.
eight
An AC voltage/ current source, and an ac inductive load.
‘We’re right at the epicenter’ - Meduza
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
2024–10–14 [Omar Gharbi Omar Gharbi ]
[image of Common-mode choke]
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
I post the exact comment here.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
but this device (an Inductor) … impedes the rapid changes in the current.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
The MOV will conduct when the voltage exceeds 50% of line voltage.
It also is a device that limits the change in current flow.
What is lightning?
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
what exactly is a ‘surge’ protector?
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Upvotes:
First Sentence:
He then describes the function of a fuse.
2024–10–10[John johnson John Johnson ]
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Now when you have a certain ac resistance, then a current flows in a loop.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
These devices are installed between the “hot” and “neutral” and protective ground.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
(Dc diagram shown, AC is similar).
Barnstars:
He then asserts :
There are three different concepts here that are getting confused.
One is “what exactly is in a ‘surge protector’ ? ”
It seems Mohan does not understand the difference between a comment and an Answer.
One
so, what happens?
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
The other is “what does a “fuse” do?”
But it can get overloaded, and no longer works.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
At least they know the answer if they wanted it.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.